Author Index

A

  • Abdolrezayi, Alireza Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
  • Akpen, Delian Gabriel The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
  • Akter, Shilpi Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
  • Azunna, Sunday Ugochukwu Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]

B

  • Baghbanan, Alireza Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
  • Behfarnia, Kiachehr The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]

C

  • Chaid, Rabah Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
  • Chapuis, Adrien Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
  • Cheraghi Seifabad, Masoud Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
  • Chitty, Francisco D. Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
  • Cimagala, Jeffrey P Optimization of Reduced Beam Sections (RBS) for Ductile Detailing of Seismic Joint Connections Using Finite Element Analysis (FEA) [Volume 4, Issue 3, 2021, Pages 43-54]

D

  • Dubecky, Daniel Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]

E

  • Ekwule, Oloche Robert The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
  • Elattar, Hassan F. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
  • El-Sayed, Abd El-Nabi Zaghloul Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]

F

  • Fallahi, Mohsen Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
  • Farzin, Saeed Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
  • Ferdowsi, Ahmad Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
  • Fu, Chung C. Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]

G

  • Granitzer, Andreas-Nizar Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
  • Gupta, Sristi Das Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]

H

  • Haddadou, Naima Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
  • Hamza, Malika-Sabria Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
  • Hossain, Ibrahim Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
  • Huang, Xinyi Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]

I

  • Islam, Shariful Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
  • Islam, Tarikul Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]

J

  • Janghu, Ravinder S Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]

K

  • Kalman Šipoš, Tanja The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
  • Khademi, Atefehossadat The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
  • Khayat, Navid Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
  • Kotnurkar, Asha S Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
  • Kulkarni, Sharawari Prafulla 3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
  • Kumar, Boppana Narendra Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
  • Kumar, G Vinod Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
  • Kvocak, Vincent Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]

L

  • Li, FaYong Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
  • Liu, Qing Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]

M

  • Malloth, Abhilash Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
  • Martins, Jairo Aparecido Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
  • Megalla, Khairy F. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
  • Mesbah, Habib-Abdelhak Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
  • Miličević, Ivana The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
  • Mohamed, Mohamed H. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
  • Mominul Alam, Shaikh Md Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]

N

  • Nallasivam, K. Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
  • Nemati, Mahmood Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]

O

  • Ogar, Joseph O. Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]

P

  • Pendhari, Sandeep Shivram 3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]

R

  • Rahman, Ishtier Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
  • Rahman, Sazedur Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
  • Rajesh, Vemula Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
  • Romão, Estaner Claro Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
  • Roy, Amrit Kumar Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]

S

  • Salakin, Sirajus Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
  • Sardalia, Atul Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
  • Shahriar, Mohammad Ahnaf Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
  • Shahrokhinasab, Esmail Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
  • Shakeri, Mohammad Sadegh The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
  • Singh, Jagbir Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
  • Sohag, Md. Ariful Islam Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]

T

  • Talawar, Vijaylaxmi T. Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
  • Tschuchnigg, Franz Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]

U

  • Ugbede, Moses George The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]

V

  • Vahedi, Masood Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
  • Vanova, Patricia Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
  • Verma, Virajan Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]

Y

  • Ye, Yunchao Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]

Z

  • Zolfagharysaravi, Sina Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]