Computational Engineering and Physical Modeling

Author Index

A

Abbaszadeh, Hadi Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
Abbaszadeh, Hadi The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
Abdolrezayi, Alireza Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
Abdullahi Alao, Jimoh Design Formula at Ultimate Stresses for Ekki (Lophira Alata) Timber Beam [Volume 2, Issue 2, 2019, Pages 25-35]
Abedi, Maryam Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
Achor, Tessy Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
Adedeji, Adeola Abdullahi Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
Adeke, Paul Terkumbur Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
Adineh, Mostafa Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
AghaRezaei, Hamed The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
Aghayan, Saideh Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]
Ahani, Ali Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
Ahani, Ali The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
Ahani, Elshan The Effects of Outrigger Type and Distribution on Seismic Behavior of Super-Tall Building [Volume 1, Issue 3, 2018, Pages 67-78]
Ajide, Sofiyyat O. Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
Akano, Theddeus Tochukwu Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
Akhil Kumar, Akula Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
Akpen, Delian Gabriel The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
Akter, Shilpi Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
Alaneme, George Uwadiegwu Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
Alaneme, George Uwadiegwu Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
Ali, Ayesha Binta Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
Alizadeh, Sahand A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
Alqarni, Mousa Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
Ameur, Houari Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
Amin Jarrahi, Mohammad Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Amirabadi, Hossein Dynamics of a Sandwich Cylindrical Shell with a Functionally Graded Auxetic Honeycomb Core [Volume 7, Issue 1, 2024, Pages 35-61]
Amiri, Behtash The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
Amiri, Behtash Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
Anbukumar, S. Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Anirood, Kameel Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
Ankidawa, B. A. Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
Ankidawa, Buba Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
Anyaegbuna, Ben E Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
Arif, Eka Juni Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
Arunprasath, K Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
Asadi, Abolfazl Comparative Study of a Subgrade Coefficient Reaction on an Arched Dam Using the Winkler Foundation Model [Volume 3, Issue 2, 2020, Pages 29-37]
Asadi, Abolfazl Evaluation of the Effect of Modulus of Elasticity in Clay Core on the Arching in the Crest of Earth Dams [Volume 3, Issue 3, 2020, Pages 12-20]
Asaeian, Arman Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
Asif, Taskid Hossain Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
Asif, Taskid Hossain Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
Askari, Elham Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
Attar, Mostafa Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
Awall, Md. Robiul Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
Ayinde, Raheem A Comparative Studies of the Effects of Blocking and Water Repellant Agents on Tensile Strengths of Fanpalm [Volume 2, Issue 1, 2019, Pages 17-29]
Azadi Kakavand, Mohammad Reza Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
Azimi, Alla Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
Azimzadeh Koocheh, Mohammad Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
Aziz, Md. Abdul Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
Azunna, Sunday Ugochukwu Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
Azunna, Sunday Ugochukwu Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]

B

Babaafjaei, Abbas Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
Babaafjaei, Abbas Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
Babaei, Alireza Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
Babaei, Mehdi Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
Babaei, Mehdi Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
Babatunde, Olawale Yusuf EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
Baghbanan, Alireza Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
Bagherzadeh Khalkhali, Ahad Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
Baiat Ghiasi, Seyed hamid Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
Bakalis, Athanasios P. New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
Bakhshi, Hosein Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
Bali, Naila N 3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
Barati, Reza Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
Basak, Aditi Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
Bashir, Muhammad Aun Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
Basiri, Mina Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Bastos, Leonardo de Souza Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
Behbahani, Fatemeh Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
Behfarnia, Kiachehr The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
Behzadi, Saeed Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
Beiranvand, Behrang Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
Beiranvand, Behrang Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
Benmansour, Nadia Effective Thermal Conductivity of Composites: Numerical Study [Volume 6, Issue 2, 2023, Pages 98-107]
Bhanuse, Maheshkumar M Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]
Bhanuse, Maheshkumar M Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
Bharti, Sandeep Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
Bodda, Saran Srikanth Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
Bunyamin, Salahudeen Settlement Modelling of Raft Footing Founded on Oferekpe/Abakaliki Shale in South East Region of Nigeria [Volume 1, Issue 1, 2018, Pages 68-82]

C

Chabokan, Elahe Seismic Assessment of Steel Moment Frames with Irregularity in Mass and Stiffness [Volume 1, Issue 4, 2018, Pages 71-89]
Chaid, Rabah Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
Chapuis, Adrien Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
Chavan, Shivprasad P An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Chawhan, Babu Shivaram Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]
Chenaghlou, Mohammad Reza Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
Cheraghi Seifabad, Masoud Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
Chitty, Francisco D. Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
Chowdhury, Sharmin Reza Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
Cimagala, Jeffrey P Optimization of Reduced Beam Sections (RBS) for Ductile Detailing of Seismic Joint Connections Using Finite Element Analysis (FEA) [Volume 4, Issue 3, 2021, Pages 43-54]
Cronico, Jonjon C. Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]

D

Dahunsi, Olurotimi Akintunde Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
Dakshayini, M S Application of FOSM and Chebyshev’s Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash Embedded Cement Concrete [Volume 3, Issue 1, 2020, Pages 16-24]
Debnath, Tapas Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
Du, Xiuli Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
Du, Xiuli Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
Dubecky, Daniel Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
Duru, Christopher Ndubuisi Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]

E

Edeh, Joseph Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
Ekwule, Oloche Robert The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
Elattar, Hassan F. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
Eliseev, Andrey Vladimirovich Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
Eliseev, S.V. Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
El-Sayed, Abd El-Nabi Zaghloul Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
Emami Azadi, M.Reza Debonding and Fracture Behavior of Concrete Specimens Retrofitted by FRP Composite [Volume 1, Issue 2, 2018, Pages 27-40]
Esmaeilabadi, Reza The Effect of Diagonal Stiffeners on the Behaviour of Stiffened Steel Plate Shear Wall [Volume 1, Issue 1, 2018, Pages 58-67]
Esmaeilabadi, Reza Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]

F

Fallahi, Mohsen Rock Slope Stability Analysis in the Left Abutment of Bakhtiary Dam, Iran [Volume 4, Issue 2, 2021, Pages 1-19]
Farahnaki, Reza Flexural Capacity Prediction for Reinforced Concrete Beams by Group Method of Data Handling Approach [Volume 1, Issue 3, 2018, Pages 100-110]
Farhoudi, Zeinab Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
Faria, Albert Wilian Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
Faridmehr, Iman Seismic Assessment of Steel Moment Frames with Irregularity in Mass and Stiffness [Volume 1, Issue 4, 2018, Pages 71-89]
Farzin, Saeed Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
Ferdowsi, Ahmad Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
Foroudi, Ali Discharge Coefficient Estimation of Sharp-Crested Curved-Plan Spillways using Soft Computing Approaches [Volume 6, Issue 2, 2023, Pages 25-44]
Fridhi, Adel 3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
Frohid, Amir Ismail A Field Study of the Impact of Human Characteristics on the Use of Signs [Volume 3, Issue 2, 2020, Pages 51-62]
Fu, Chung C. Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
Funari, Marco Francesco A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]

G

Gebregziabher, Henok Fikre Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
Gebremedhin, Gideon Amha Finite Element Based Investigation of Belled Piers in Expansive Soils [Volume 5, Issue 3, 2022, Pages 64-81]
Ghasemi, Maryam Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
Ghoddusi, Meysam Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
Granitzer, Andreas-Nizar Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
Gupta, Abhinav Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
Gupta, Sristi Das Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
Gupta, Vinay Vedmani Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
Gupta, Vipin Vedmani Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]

H

Habibi, Saed Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
Haddadou, Naima Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
Hadi, Abdulazeez Moh Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
Haji, Fatemeh Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Hamza, Malika-Sabria Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
Hamzei, Mahdi Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
Haque, Akramul Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
Hasan, Farhad Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
Hasan, Mahadi Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
Hasnat, Arif A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
Hassan, A. A. Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
Hassan, Sheikh Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
Heidari, Ali Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
Himika, Taasnim Ahmed Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
Hong, C.C. Thermal Vibration of Thick Functionally Graded Material Spherical Shells by Using Third-order Shear Deformation Theory and Simply Homogeneous Equation [Volume 6, Issue 4, 2023, Pages 46-58]
Horsfall, Boma Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]
Hossain, Ibrahim Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
Hosseini, SeyyedReza Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
Hosseini, SeyyedReza Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
Houari, Ouabel Using Pressuremeter Test Results to Estimate Bearing Capacity in the Vicinity of a Slope- Numerical Analysis- [Volume 2, Issue 2, 2019, Pages 15-24]
Houari, Ouabel Probabilistic Analysis of Bearing Capacity with the Pressuremeter Method [Volume 5, Issue 4, 2022, Pages 102-112]
Huang, Xinyi Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
Humyra, Tasnuva Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
Husin, Albert Eddy Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]

I

Ibitolu, Babatunde EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
Ida blessy, S Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
Incharashree, K.Y. Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
Ishaku, J. M. Estimation of Aquifer Transmissivity Using Dar Zarrouk Parameters Derived from Resistivity Soundings on the Floodplain of River Dadin Kowa, Gombe State, Northeastern Nigeria [Volume 1, Issue 4, 2018, Pages 36-52]
Islam, Shafiqul Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
Islam, Shafiqul Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
Islam, Shafiqul Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
Islam, Shariful Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
Islam, Tarikul Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
Islam, Tarikul Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]

J

Jabbari, Mostafa Modelling Effects of Land Use Changes on Traffic Based on Proposed Traffic Simulator [Volume 2, Issue 3, 2019, Pages 53-64]
Jafari-Talookolaei, Ramazan-Ali Wave Propagation through a Submerged Horizontal Plate at the Bottom of a Water Channel [Volume 3, Issue 4, 2020, Pages 1-19]
Jandaghian, Zahra Flow and Pollutant Dispersion Model in a 2D Urban Street Canyons Using Computational Fluid Dynamics [Volume 1, Issue 1, 2018, Pages 83-93]
Janghu, Ravinder S Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
Javaheri-Tafti, Mohamad Reza An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
Jayesimi, Olumide On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
Jimoh, Abdullahi Alao Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
Jimoh, Abdullahi EN 338 Strength Characterization and Grading of Igba (Rhizophora Racemosa) and Adere (Syzgium Guineense) Timbers for Structural Applications [Volume 2, Issue 4, 2019, Pages 24-37]
Joel, Manasseh Simulation of Priority Queuing at TOTAL Petrol Filling Station in Makurdi Town Using SimEvents Toolkit [Volume 2, Issue 1, 2019, Pages 56-66]
Jonah, Jonah Okon Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
Ju, Bu Seog Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]
Jung, WooYoung Fragility of a Weir Structure due to Scouring [Volume 3, Issue 1, 2020, Pages 1-15]

K

Kabiri Koochaksaraei, Mohsen Evaluation of Limit Equilibrium and Finite Element Methods in Slope Stability Analysis - Case Study of Zaremroud Landslide, Iran [Volume 2, Issue 3, 2019, Pages 1-15]
Kalani, Leila Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
Kalman Šipoš, Tanja The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
Kamgar, Reza Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
Kamla, Youcef Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
Kamran, Hassan Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
Kamran, Hassan Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
Kapri, Priyam Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Karamizadeh, Ehsan An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
Kashefizadeh, Mohammad Hossein Steel Plate Shear Wall with Different Infill Steel Plates [Volume 1, Issue 3, 2018, Pages 1-14]
Kasiviswanathan, M Mechanical Properties of Partial Replacement of Cement by adding Neem Gum/Accaacia Gum a Naturally Available Polymeric Fillers [Volume 6, Issue 3, 2023, Pages 73-85]
Kayode, Adegun Isaac Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]
Keerthi Gowda, B S K Application of FOSM and Chebyshev’s Theorem Concept to Predict Compressive Strength Attributes of Corncob Ash Embedded Cement Concrete [Volume 3, Issue 1, 2020, Pages 16-24]
Keshavarz, Zahra Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
Khadem, Sharfaraj Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
Khademi, Atefehossadat The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
Khanmohammadi, Mohammad Seismic Fragility Assessment of Local and Global Failures in Low-rise Non-ductile Existing RC Buildings: Empirical Shear-Axial Modelling vs. ASCE/SEI 41 Approach [Volume 1, Issue 1, 2018, Pages 38-57]
Kharmale, Swapnil B Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
Khayat, Navid Comparative Three-Dimensional Finite Element Analysis of Piled Raft Foundations [Volume 4, Issue 1, 2021, Pages 19-36]
Khiali, Vahid Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]
Khosravi, Hossein Evaluation of Seismic Behavior of Steel Shear Wall by Time History Analysis [Volume 2, Issue 1, 2019, Pages 38-55]
Kiran, K.K. H Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
Kiran, K.K. Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
Kiran, K.K. Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
Kiyani, Khosro Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
Kolo, Daniel N Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
Kolo, Stephen Sunday Reliability Assessment of Natural Aggregate Pulverized Glass Powder Concrete Beam Subjected to Shearing Forces [Volume 6, Issue 2, 2023, Pages 45-53]
Komasi, Mehdi Numerical Analysis of the Effect of Blast Wave on Pressure Vessels [Volume 6, Issue 3, 2023, Pages 39-51]
Komasi, Mehdi Optimizing the Design of Nickel and Composite Pressure Vessels [Volume 7, Issue 1, 2024, Pages 1-12]
Kori, Jagadish G Controlling Blast Loading of the Structural System by Cladding Material [Volume 1, Issue 3, 2018, Pages 79-99]
Kori, Jagadish Blast Mitigations of Mid Rise Structures by Cladding Material [Volume 2, Issue 4, 2019, Pages 78-94]
Kotnurkar, Asha S Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
Kristiyanto, Kristiyanto Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
Kudelya, Anatoliy Mikhail Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
Kulkarni, Sharawari Prafulla Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
Kulkarni, Sharawari Prafulla 3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
Kumar, Boppana Narendra Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
Kumar, Boppana Narendra Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
Kumar, G Vinod Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
Kumar, Pariyada Pradeep Effect on the Addition of Nano Silica Particles and Peg on the Rheological, Strength and Durability Properties of High Strength Self Curing Self Compacting Concrete [Volume 5, Issue 2, 2022, Pages 91-112]
Kumbhar, Yogesh D An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Kvocak, Vincent Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]

L

Laribi, Rim 3D Modeling and Augmented Reality for Learning [Volume 6, Issue 3, 2023, Pages 52-61]
Li, FaYong Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
Liu, Qing Effect of Threshold Twin Volume Fraction in Crystal Plasticity Modeling [Volume 4, Issue 1, 2021, Pages 84-100]
Lonetti, Paolo A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]

M

Mahdavi, Masoud Modelling and Comparison of Plastic Performance in Ten Types of New Steel Braces under Pushover Analysis [Volume 6, Issue 2, 2023, Pages 79-97]
Mahdavi, Masoud Evaluation and Comparison of Seismic Performance in Irregular Steel Structures with Modern Concentrically Braces [Volume 6, Issue 4, 2023, Pages 59-79]
Mahdi, Mofid Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
Mahdi, Mofid Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
Makarios, Triantafyllos New Seismic Pushover Procedures using either Floor Enforced-Displacements or Inelastic Dynamic Eccentricities on Irregular Single-Storey R/C Buildings [Volume 2, Issue 4, 2019, Pages 1-23]
Malloth, Abhilash Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
Mamun, Md. Abdullah Al Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
Mane, Kiran M An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Marie, Iqbal Numerical Simulation of Concrete Mix Structure and Detection of its Elastic Stiffness [Volume 1, Issue 1, 2018, Pages 12-22]
Marie, Iqbal Three-Dimensional Modelling of Concrete Mix Structure for Numerical Stiffness Determination [Volume 1, Issue 3, 2018, Pages 15-27]
Marinho, Josenilson A. Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
Martins, Jairo Aparecido Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
Mathi, K. Kavin Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
Mathi, K. Kavin Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
Maydanchi, Mohammad Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Mbadike, Elvis Modelling of the Compressive Strength of Palm-Nut-Fibre Concrete Using Scheffe’s Theory [Volume 3, Issue 1, 2020, Pages 36-52]
Mbadike, Elvis Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
Meena, Rahul Kumar Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Megalla, Khairy F. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
Mehrdoost, Zahra Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
Mesbah, Habib-Abdelhak Contribution of the Blast Furnace Slag on the Behavior of HPC in a Hydrochloric Environment [Volume 4, Issue 2, 2021, Pages 27-38]
Miličević, Ivana The Use of Machine Learning Models in Estimating the Compressive Strength of Recycled Brick Aggregate Concrete [Volume 4, Issue 4, 2021, Pages 1-25]
Mironov, A.S. Approaches in the development of motion sensors in the dynamics of granular media [Volume 2, Issue 2, 2019, Pages 1-14]
Mirrashid, Masoomeh A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
Moghiman, Mohammad Numerical Investigation of Car Park Fire at Special Weather Conditions [Volume 6, Issue 4, 2023, Pages 33-45]
Mohamed, Mohamed H. Cost Analysis of a Large Solar Plant with Parabolic Trough Concentrators Using Molten Salt Storage Tank [Volume 4, Issue 1, 2021, Pages 37-55]
Mohasel, Mohamadhosein Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
Mohitkar, Vinod M Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
Molla, Md Mamun Lattice Boltzmann Simulation of Fluid Flow and Heat Transfer through Partially Filled Porous Media [Volume 2, Issue 4, 2019, Pages 38-57]
Mominul Alam, Shaikh Md Identifying the Amount of Heat Flux and Thermal Conduction through Fabrics with Appropriate Heat Equation [Volume 4, Issue 2, 2021, Pages 53-67]
Moniri, Alireza Use of Tuned Mass Dampers in Controlling the Vibrations of Steel Structures with Vertical Irregularity of Mass [Volume 1, Issue 2, 2018, Pages 83-94]
Moradi, Mostafa Multi-objective Optimization of Steel Frames with Added Viscous Dampers using Imperialist Competitive Algorithm [Volume 5, Issue 1, 2022, Pages 69-88]
Morsali, Saeed Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]
Moshaver, Paria Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
Mostafa Gharabaghi, Ahmad Reza Presenting an Optimal Design Procedure for a Variety of TLCDs to Improve the Seismic Response of Offshore Platforms [Volume 6, Issue 3, 2023, Pages 1-26]
Motamed, Sara Facial Emotion Recognition Using Convolutional Brain Emotional Learning (CBEL) Model [Volume 5, Issue 3, 2022, Pages 38-49]
Mota Silva, Jean Carlos Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
Muhammed, Kabeer Olalekan Numerical Modelling of Mixability of Highly Viscous Syrup in a U-Shaped Tank with Centrally Rotated Streamers [Volume 6, Issue 1, 2023, Pages 70-84]

N

Naderpour, Hosein A Computational Model for Estimating the Compressive Strength of Mortars Admixed with Mineral Materials [Volume 1, Issue 4, 2018, Pages 16-24]
Nadgouda, Pavan A An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Nallasivam, K Dynamic and Fatigue Life Prediction Analysis of Airfield Runway Rigid Pavement Using Finite Element Method [Volume 5, Issue 3, 2022, Pages 1-23]
Nallasivam, K Static Analysis of Rigid Airfield Pavement Using Finite Element Method Vs Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 23-50]
Nallasivam, K Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
Nallasivam, K Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]
Nallasivam, K. Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
Narendra Kumar, Boppana Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]
Ndububa, Emmanuel E Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
Nemati, Mahmood Development of Dam-Break Model Considering Real Case Studies with Asymmetric Reservoirs [Volume 4, Issue 4, 2021, Pages 39-63]
Noman, Ahmad Numerical Simulation and Parametric Study on the Moment Capacity of Composite Beam [Volume 2, Issue 3, 2019, Pages 16-26]
Norouzi Azad, Alireza Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Nwafor, Emmanuel Okechukwu Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
Nwafor, Emmanuel Okechukwu Economic Importance of Solid Waste in the Production of Pyrolytic Oil Utilized in Polymer Modified Bio-Binder Production in Makurdi Nigeria [Volume 6, Issue 4, 2023, Pages 21-32]

O

Odeyemi, Samson Olalekan Modelling and Simulation of Reinforced Concrete Bridges with varying percentages of Shape Memory Alloy Rods [Volume 1, Issue 4, 2018, Pages 62-70]
Ogar, Joseph O. Characteristic Properties of Concrete with Recycled Burnt Bricks as Coarse Aggregates Replacement [Volume 4, Issue 1, 2021, Pages 56-72]
Ogbonna, Chimmaobi Characterisation and Use of Cassava Peel Ash in Concrete Production [Volume 3, Issue 2, 2020, Pages 12-28]
Ogolo, Naomi Amoni Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
Ogolo, Naomi Amoni Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
Ohwofadjeke, Paul Ogheneochuko Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
Ojo, Olatunji Oladimeji Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
Ojobo, Sylvester O Stabilization of Ikpayongu laterite using Cement, RHA and Carbide Waste Mixture for Road Subbase and Base Material [Volume 3, Issue 4, 2020, Pages 77-96]
Okoroafor, Ijere Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
Olaleke, Olujoba Mesach Design, Fabrication and Structural Analysis of a 5 Tons Hydraulic Press and Mould Machine for Crucible Production [Volume 3, Issue 3, 2020, Pages 46-58]
Olarewaju, Kolade Oluwole Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
Olayiwola, Patrick Shola Numerical Investigation into the Effect of Laminated Casing on the Impact Resistance of Smartphone Screens [Volume 2, Issue 4, 2019, Pages 58-77]
Onyekonwu, Mike O. Effect of Aluminum Oxide Powder and Nanoparticles on Kaolinite Mobilization in Sand [Volume 5, Issue 4, 2022, Pages 67-78]
Onyekonwu, Mike O. Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]
Oyar Hossein, Mohamadamin Investigating on Hydrodynamic Behavior of Slotted Breakwater Walls Under Sea Waves [Volume 2, Issue 1, 2019, Pages 30-37]

P

Palash, A.B.M. Golam Rabbany Study of the Effect of Vibration Characteristics on the Stability of RC Structures [Volume 5, Issue 2, 2022, Pages 113-129]
Parker, Johné Adaptive Neuro-Fuzzy Inference System (ANFIS) Integrated with Genetic Algorithm to Optimize Piezoelectric Cantilever-Oscillator-Spring Energy Harvester: Verification with Closed-Form Solution [Volume 5, Issue 4, 2022, Pages 1-22]
Pascuzzo, Arturo A Moving Cohesive Mesh Formulation to Predict Debonding Phenomena in Layered Structures [Volume 1, Issue 2, 2018, Pages 16-26]
Paswan, Abhishek Prakash Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Patil, Amrutrao E Seismic Analysis of Eccentric Steel Structure on a Shaking Table [Volume 3, Issue 2, 2020, Pages 1-11]
Pendhari, Sandeep Shivram Cylindrical Bending of Power Law Varied Functionally Graded Laminate Subjected to Thermo-Mechanical Loading [Volume 3, Issue 4, 2020, Pages 20-39]
Pendhari, Sandeep Shivram 3D Semi-Analytical Solutions for Functionally Grade Power Law Varied Laminate Subjected to Thermo-Mechanical Loading [Volume 4, Issue 3, 2021, Pages 70-98]
Pendhari, Sandeep Shivram Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
Pendhari, Sandeep Shivram Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
Pinem, Mekro Permana Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
Pirmohammadi Alishah, Farhad The Effect of Zeolite on Different Mechanical Properties and Permeability of Self-Compacting Concrete [Volume 3, Issue 1, 2020, Pages 53-68]
Podousova, Tatyana Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
Pouya, Shaheen Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Prajwal, R.P.N. Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]
Prasad, CSMV Analytical Study of Fatigue Crack Growth Behavior of Steel Structure Reinforced with FRP [Volume 5, Issue 3, 2022, Pages 24-37]

Q

Quadri, S.S. Experimental and Numerical Investigations of Laterally Loaded Pile Group in Multilayered Cohesionless soil [Volume 1, Issue 3, 2018, Pages 28-45]

R

Rababah, Mumen Data Visualization of Traffic Violations in Maryland, U.S. [Volume 6, Issue 1, 2023, Pages 57-69]
Raeisi, Jalil Time-Frequency Localization of Earthquake Record by Continuous Wavelet Transforms [Volume 2, Issue 2, 2019, Pages 49-61]
Rahgozar, Reza Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
Rahman, Faysal Ibna A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]
Rahman, Ishtier Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
Rahman, Sazedur Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
Rahman, S M Shazeebur Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
Rahmon, Rauf Reliability-Based Investigation on Compressive Strength Characteristics of Structural-Sized Iroko (Meliceae Excelsa) and Mahogany (Khaya Ivorensis) Timber Column Found in Nigeria [Volume 1, Issue 1, 2018, Pages 23-37]
Raj, Ritu Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Rajesh, Vemula Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres [Volume 4, Issue 3, 2021, Pages 1-18]
Rashid, Muhaimeen Ur Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
Reddy, Gami Performance-Based Design of RC Structures Subjected to Seismic Load Using a Hybrid Retrofitting Method with Friction Damper and Steel Bracing [Volume 5, Issue 1, 2022, Pages 19-35]
Reddy, Gami Response Control of Structures Subjected to Multi-Hazards of Earthquake and Wind Using Base Isolators and Absorbers [Volume 5, Issue 2, 2022, Pages 19-44]
Rezuan, Mehebub Numerical Assessment of Isolated Footing Capacity due to its Size and the Impact of Neighboring Foundation [Volume 5, Issue 2, 2022, Pages 45-70]
Ribeiro, Vinicius G. Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
Risan, Hussam K. Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
Romão, Estaner Claro Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
Romão, Estaner Claro Numerical Simulation of Stresses Produced on Hydraulic Clutch Discs due to Heat Generated During Operation [Volume 4, Issue 3, 2021, Pages 19-28]
Romero, Fe Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
Romero, Nelson Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
Romero, Raymundo Assessing Flood Occurrence and Modeling Impact of Urban Drainage Structure [Volume 3, Issue 3, 2020, Pages 1-11]
Roshani, Abdolreza Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
Roshani, Gholam Hossein Detecting Human Behavioral Pattern in Rock, Paper, Scissors Game Using Artificial Intelligence [Volume 3, Issue 1, 2020, Pages 25-35]
Roy, Amrit Kumar Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
Roy, Amrit Kumar Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
Roy, Sandip Numerical Analysis of Slope Stability with Nailing Method Using Bamboo as Nailing Material [Volume 6, Issue 1, 2023, Pages 1-17]
Rugbani, Ali Aerodynamic Analysis of Autonomous Battery Electric Truck Concepts for Drag Reduction [Volume 5, Issue 2, 2022, Pages 71-90]
Rushikesh, Mirkute Assessment of Crack Development Age Due to Corrosion on Reinforced High Strength Self Compacting Concrete with Inclusion of Potential Ternary Blended Cementitious Materials [Volume 6, Issue 1, 2023, Pages 18-35]

S

Saba, Hamidreza Comparative Study of a Subgrade Coefficient Reaction on an Arched Dam Using the Winkler Foundation Model [Volume 3, Issue 2, 2020, Pages 29-37]
Saba, Hamidreza Evaluation of the Effect of Modulus of Elasticity in Clay Core on the Arching in the Crest of Earth Dams [Volume 3, Issue 3, 2020, Pages 12-20]
Saha, Ovi Ranjan Flood Hazard Mapping of the Floodplain of the Jamuna River [Volume 5, Issue 1, 2022, Pages 89-101]
Sahel, Djamel Numerical Investigation of the Cooling of Shear Thinning Fluids in Cylindrical Horizontal Ducts [Volume 1, Issue 4, 2018, Pages 53-61]
Salajeghe, Ali Improving the Behavior of Non-Uniform Tall Structures in Determining the Optimum Location of Belt Truss System [Volume 3, Issue 3, 2020, Pages 34-45]
Salakin, Sirajus Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
Salama, Magdy I. Buckling of Tapered Columns with Polygon Cross-Section [Volume 1, Issue 2, 2018, Pages 59-69]
Salama, Magdy I Elastic Buckling of Single-Stepped Columns with End and Intermediate Axial Loads [Volume 1, Issue 4, 2018, Pages 25-35]
Salehi Fereidouni, Saleh Investigation on the Seismic Performance of Joints with Different Shapes in Bridge Columns [Volume 5, Issue 1, 2022, Pages 1-18]
Salehi Fereidouni, Saleh Evaluation the Impact of Flexible Joints and Deck on the Seismic Response of Bridges [Volume 5, Issue 2, 2022, Pages 1-18]
Salokhe, Sudarshan A An ANN to Predict Sorptivity and Water Absorption of Concrete Made with Industrial Waste and Artificial Sand [Volume 6, Issue 1, 2023, Pages 44-56]
Sangle, Keshav K Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
Santos da Silva, Jose Guilherme Human Comfort Assessment of Buildings Considering the Effect of the Masonry Infills and the Soil-Structure Interaction [Volume 2, Issue 3, 2019, Pages 38-52]
Sardalia, Atul Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
Sarsam, Saad Issa Influence of Additives on the Failure Mode of Asphalt Concrete [Volume 6, Issue 4, 2023, Pages 80-91]
Shabani, Mohammad Javad Numerical Analysis of Reverse Dip-slip Fault Rupture on Steel Buildings [Volume 3, Issue 4, 2020, Pages 40-57]
Shahriar, Fahim Application of Numerical Method in Assessing the Variations in Pile Group Efficiency under Different Circumstances [Volume 5, Issue 1, 2022, Pages 50-68]
Shahriar, Mohammad Ahnaf Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) [Volume 4, Issue 3, 2021, Pages 55-69]
Shahrokhinasab, Esmail Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
Shakeri, Mohammad Sadegh The Relation between Deposited Weight and Quality of Coating in EPD Method Derived by Genetic Programming [Volume 4, Issue 1, 2021, Pages 73-83]
Sharifi, Yaser An Innovative Forecasting Formula for Axial Compression Capacity of Circular Steel Tubes Filled with Concrete through Neural Networks [Volume 5, Issue 4, 2022, Pages 51-66]
Siddika, Ayesha Study on Natural Frequency of Frame Structures [Volume 2, Issue 2, 2019, Pages 36-48]
Silveira, André M. Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
Silveira, Sidnei R. Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
Sinaga, Lastarida Blockchain-Building Information Modeling (BIM): Aplication in Cost Eficiency of Retrofitting Green Chemical Industrial Buildings [Volume 6, Issue 2, 2023, Pages 1-24]
Singh, Indrajeet Study of Traffic Forecast for Intelligent Transportation System [Volume 5, Issue 3, 2022, Pages 50-63]
Singh, Jagbir Wind Pressure Coefficients on Pyramidal Roof of Square Plan Low Rise Double Storey Building [Volume 2, Issue 1, 2019, Pages 1-16]
Singh, Jagbir Wind Induced Pressure Variation on High-Rise Geometrically Modified Building Having Interference through CFD Simulation [Volume 4, Issue 4, 2021, Pages 26-38]
Siqueira, Adriano Francisco Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
Sobamowo, Gbeminiyi Musibau Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
Sobamowo, Gbeminiyi Musibau On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
Sohag, Md. Ariful Islam Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material [Volume 4, Issue 3, 2021, Pages 29-42]
Staudt, Ederson Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]

T

Taiwo, Audu Mohammed Comparative Studies of the Effects of Blocking and Water Repellant Agents on Tensile Strengths of Fanpalm [Volume 2, Issue 1, 2019, Pages 17-29]
Taiwo, Audu Mohammed Chemical Composition of Commonly Used Local and Foreign Steel Reinforcements and the Effects on the Strength Property of the Material Composites [Volume 2, Issue 3, 2019, Pages 27-37]
Talawar, Vijaylaxmi T. Influence of Jeffrey Nanofluid on Peristaltic Motion in an Inclined Endoscope [Volume 4, Issue 2, 2021, Pages 68-94]
Thombare, Chandrakant Narhari Efficient Configuration of Storage Rack System as Per Nonlinear Static Pushover Analysis under Triangular and Uniform Pattern of Lateral Loading Pattern [Volume 1, Issue 2, 2018, Pages 41-58]
Torkian, Hojjatollah Determining the Drift in Reinforced Concrete Building Using ANFIS Soft Computing Modeling [Volume 1, Issue 1, 2018, Pages 1-11]
Tschuchnigg, Franz Numerical Analysis of Segmental Tunnel Linings employing a Hybrid Modeling Approach [Volume 4, Issue 1, 2021, Pages 1-18]
Tusher, Hasib Imran A Circumstantial Review on Ride-sharing Profile in Dhaka City [Volume 3, Issue 4, 2020, Pages 58-76]

U

Udo, Anietie Effiong Characterization of Fluid-Structure Interaction on Hydrodynamic Performance of Different Ship Hulls Using ANSYS [Volume 7, Issue 1, 2024, Pages 13-34]
Ugbede, Moses George The Effect of Heavy Metal Concentration on the Soil of Odagbo Area, Kogi State Nigeria [Volume 4, Issue 4, 2021, Pages 84-93]
Ukwu, Austin Viscosity Model of Polymer Extract from Irvingia Gabonensis [Volume 6, Issue 3, 2023, Pages 27-38]

V

Vahedi, Masood Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]
Vanova, Patricia Prefabricated Composite Beams Based on Innovative Shear Connection [Volume 4, Issue 2, 2021, Pages 20-26]
Vashpanov, Yuriy Alex Underground 3D Topography Measured by Radar Sounding [Volume 6, Issue 3, 2023, Pages 62-72]
Venâncio, Stênio de Sousa Numerical Study of Hydraulic Percolation in Porous Media Using Two Hydraulic Structures [Volume 6, Issue 4, 2023, Pages 1-20]
Verma, Virajan Modal Analysis of a Thin-Walled Box-Girder Bridge and Railway Track Using Finite Element Framework [Volume 4, Issue 4, 2021, Pages 64-83]
Vhanmane, Mangesh Analysis of Diagrid Structural System for High Rise Steel Buildings [Volume 3, Issue 3, 2020, Pages 21-33]

W

Waheed, Akindoye On the Study of Magnetohydrodynamic Squeezing Flow of Nanofluid between Two Parallel Plates Embedded in a Porous Medium [Volume 1, Issue 4, 2018, Pages 1-15]
Wang, L. Modeling of the New Boundary of Reaction Force Based on Particle Collision in the Smoothed Particle Hydrodynamics [Volume 1, Issue 3, 2018, Pages 46-66]
Wang, P. Modeling of the New Boundary of Reaction Force Based on Particle Collision in the Smoothed Particle Hydrodynamics [Volume 1, Issue 3, 2018, Pages 46-66]
Wani, Khair Ul Faisal Static Analysis of Rigid Pavement Runway under the Influence of Aircraft Loading by Finite Element Technique [Volume 5, Issue 4, 2022, Pages 79-101]
Wani, Khair Ul Faisal Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique [Volume 6, Issue 2, 2023, Pages 54-78]

Y

Yasar, Rafjany Numerical Analysis of Retrofitted RC Column under Lateral Load [Volume 5, Issue 3, 2022, Pages 82-95]
Ye, Yunchao Vehicle Bridge Interaction Analysis on Concrete and Steel Curved Bridges [Volume 4, Issue 4, 2021, Pages 94-108]
Yinusa, Ahmed Transient Combustion Analysis for Iron Micro-Particles in a Gaseous Oxidizing Medium Using Adomian Decomposition Method [Volume 1, Issue 2, 2018, Pages 1-15]
Yücel Işildar, Gamze Determination of Environmental Impacts of Bituminous Highway’s by Life Cycle Assessment [Volume 3, Issue 2, 2020, Pages 38-50]

Z

Zabadal, Jorge G. Analytical Simulations for Spill Point Source Localization Using Inverse Problems in Closed Form [Volume 6, Issue 1, 2023, Pages 36-43]
Zakariah, D. S. Design and Evaluation of Drip Irrigation System for Date Palm Plantations in MAUTECH, Yola, Adamawa State, Northeastern Nigeria [Volume 1, Issue 2, 2018, Pages 70-82]
Zaki, Rana Ismail K. Systematic Review for Behavior of Post-Tensioned Concrete Members with Different Tendon Bonding Conditions [Volume 5, Issue 1, 2022, Pages 36-49]
Zolfagharysaravi, Sina Improvement of Concrete Characterization Using Nanosilica [Volume 4, Issue 2, 2021, Pages 39-52]