Pouyan PressComputational Engineering and Physical Modeling2588-69591220180401Buckling of Tapered Columns with Polygon Cross-Section59696482810.22115/cepm.2018.136082.1032ENMagdy I.SalamaCivil Engineering Department, Faculty of Engineering, Kafrelsheikh University. Kafrelsheikh, EgyptJournal Article20180316This paper is concerned with the elastic stability of slender tapered columns of regular polygon cross-section with constant volume is presented. Various end conditions of the tapered columns such as pinned ends, clamped -pinned ends and clamped ends are considered in this paper. The analysis is developed using finite element method for linear, parabolic and sinusoidal tapers assuming firstly circular cross-section. The polygon cross-sections other the circular one are studied by investigating a direct relation between the side number of the polygon cross-section and the critical load parameter. The main parameter in this study is the section ratio that defined as the ratio between the section depths at the mid-span of the considered column to that at the column ends. The obtained numerical results are introduced in many curves to describe the relation between the buckling load and the section ratio considering linear, parabolic and sinusoidal tapers and various side number of the polygon cross-section for each end conditions. The obtained results of the buckling factor are simple with satisfactory accuracy compared with results that obtained in other theoretical studies.http://www.jcepm.com/article_64828_c69b0c6dd311ee4b01780b1555fea9b4.pdf